AAT4626IAS-1-T1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2002 |
| Series | ASPM™ |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 130MOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 1.25A |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AAT4626IAS-1-T1 Overview
Cut Tape (CT) is how it's packaged.There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.It has been mounted as Surface Mount on the LED driver.There is a switch type of USB Switch.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.There is a default setting of 2 for output.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is P-Channel volts.Currently, the LED driving board is equipped with Slew Rate Controlled, Status Flag features.A total of 8 terminations have been found in it.In order to operate, 8 pins are used.It is important to note that the LED driving board has 1 functions.As a result, the maximum output current is reduced to 1.5A in order to meet the operation requirements.It is possible to obtain high efficiency with a supply voltage of 5V.This lighting driver is mounted in the way of Surface Mount.8 pins are connected to it in total.Currently, the LED driving board has 130MOhm resistance.It belongs to the ASPM? series.In this case, Vsup (maximum supply voltage) is set to 5.5V.
AAT4626IAS-1-T1 Features
Supplied from 5V
Resistance of 130MOhm
AAT4626IAS-1-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT4626IAS-1-T1 Power Switches ICs applications.
- Portable Music Players
- Wireless/Networking Cards
- Wireless Modem Data Cards
- Smart Phones, Feature Phones
- Portable GPS Device
- Solid State Drivers
- Portable GPS
- USB Power Distribution
- Portable/Handheld Devices
- Hot Swap
