AAT4684ITP-T1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSOP |
| Number of Pins | 12 |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Resistance | 100mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 625mW |
| Terminal Position | DUAL |
| Terminal Form | J BEND |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Max Output Current | 1.8A |
| Operating Supply Voltage | 14V |
| Temperature Grade | INDUSTRIAL |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 625mW |
| Output Current | 1.8A |
| Max Supply Current | 50μA |
| Turn On Delay Time | 10 ms |
| Min Input Voltage | 3V |
| Max Input Voltage | 14V |
| Turn-Off Delay Time | 6 ms |
| Fault Protection | Over Temperature |
| Built-in Protections | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 3mm |
| Width | 2.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
AAT4684ITP-T1 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a package for it in the TSOP package.As a default, the output is set to 1.It consists of 12 terminations in total.The operation is performed through the 12 pins.It consists of 1 functions.To meet the operation criteria, the maximum output current drops to 1.8A.With a supply voltage of 5V, high efficiency is possible.It is positioned in the direction of Surface Mount.As a result, it has a total of 12 pins.100mOhm resistance is present in the lighting driver.This case has the output current set to 1.8A.In order to achieve the best efficiency, the supply voltage should be set to 14V.This LED driver can handle voltages up to 14V volts.The minimum input voltage is 3V volts.A maximum operating temperature of 85°C°C is required for stable operation.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.There is a maximum current requirement of 50μA for its operation.
AAT4684ITP-T1 Features
Supplied from 5V
Resistance of 100mOhm
AAT4684ITP-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT4684ITP-T1 Power Switches ICs applications.
- Wireless/Networking Cards
- Smart Phones, Feature Phones
- Wearable Devices
- HDD and SSD
- HDD, SSD
- Solid State Drivers
- Set-Top Boxes
- Hot Swap
- Hard Disk Drives
- USB Power Distribution
