Parameters |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Supply Voltage |
3.3V |
Terminal Pitch |
0.45mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Function |
Current Limiting |
Number of Outputs |
1 |
Operating Supply Voltage |
5.5V |
Voltage - Input |
2.5V~5.5V |
Max Supply Current |
120μA |
Current - Output |
2.5A |
Turn On Delay Time |
6 μs |
Turn-Off Delay Time |
10 μs |
Interface IC Type |
BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
Sensing Method |
High-Side |
Built-in Protections |
TRANSIENT; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SOURCE |
Height Seated (Max) |
0.8mm |
Length |
4mm |
Width |
3mm |
RoHS Status |
ROHS3 Compliant |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-WFDFN Exposed Pad |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
320mOhm |
AAT4712IRN-T1 Overview
In package Tape & Reel (TR), buck boost converter is included.In this case, voltage regulator has been packaged in the same way as 16-WFDFN Exposed Pad.Surface Mount is used to mount this current regulator on the board.As a rule of thumb, the operating temperature should not exceed -40°C~85°C.As an input voltage, you will be able to input a voltage equal to 2.5V~5.5V.The 16 termination is a method for terminating a transmission line by connecting a voltage regulator that matches its characteristic impedance, which is the method of terminating a transmission line with a voltage regulator.In this example, the current regulator has been mounted using Surface Mount.Providing that it is powered by a 3.3VV power supply, the constant current should work without any problems.As a result of 2.5A's output current, it is one of the most flexible power converters available.For optimum efficiency, the supply voltage should be kept at 5.5V at all times.The maximal supply current of 120μA makes it feature maximum current regulator's design flexibility.There is a 1 output configured.Powered by a battery, this electrical dc to dc converter's resistance is 320mOhm (Ω).
AAT4712IRN-T1 Features
Tape & Reel (TR) package
1 output
AAT4712IRN-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT4712IRN-T1 Current Regulation/Managements applications.
- Programmable current source
- Over current monitor
- Industrial applications current measurement
- Engine management
- Vehicle dynamic controls
- Level translating
- Diesel injection controls
- Over-current protection
- DC motor control
- Battery chargers