ACPL-7900-300E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD, Gull Wing |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ACPL-7900 |
| Qualification Status | Not Qualified |
| Output Voltage | 2.5V |
| Power Supplies | 3.3/55V |
| Number of Circuits | 1 |
| Operating Supply Current | 18.5mA |
| Nominal Supply Current | 13mA |
| Amplifier Type | Isolation |
| Current - Input Bias | 100nA |
| Max Input Voltage | 200mV |
| Voltage - Supply, Single/Dual (±) | 3V~5V |
| Output Current per Channel | 11mA |
| Input Offset Voltage (Vos) | 600μV |
| Bandwidth | 200 kHz |
| Supply Voltage Limit-Max | 5.5V |
| -3db Bandwidth | 200MHz |
| Input Current | 400mA |
| Isolation Voltage | 5kV |
| Voltage Gain-Min | 7.95 |
| Height | 3.56mm |
| Length | 9.8mm |
| Width | 6.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ACPL-7900-300E Overview
The linear amplifier is packaged in a 8-SMD, Gull Wing case which makes it easy for the consumer to handle. This is a Isolation type op amp. In the case of Tube cases, linear amplifier will be delivered. It is estimated that there will be at least 8 terminations this year. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A total of 8 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 600μV. This electronic part is recommended for mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~105°C when it comes to operating temperatureThe buffer amplifier is capable of operating from a supply current of 18.5mA . A linear amplifier like this has 1 circuits on it. A minimum voltage gain of 7.95 is the minimum voltage gain that this instrumentation amplifier is capable of producing.
ACPL-7900-300E Features
supply voltage of 5V
ACPL-7900-300E Applications
There are a lot of Broadcom Limited ACPL-7900-300E Instrumentational OP Amps applications.
- Polarized electrodes
- Division circuits
- Video conversion and routing
- Weighing systems
- Proportional counter tubes
- Medical instruments
- Laptop
- Digital cameras
- Weak signal detection
- Communication device
