ACPL-790A-500E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD, Gull Wing |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ACPL-790A |
| Output Type | Analog, Digital |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Operating Supply Current | 18.5mA |
| Amplifier Type | Isolation |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 3V~5.5V |
| Output Current per Channel | 11mA |
| Input Offset Voltage (Vos) | 600μV |
| Bandwidth | 200 kHz |
| Voltage - Input Offset | 600μV |
| -3db Bandwidth | 200MHz |
| Isolation Voltage | 5kV |
| Height Seated (Max) | 4.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
ACPL-790A-500E Overview
In the package, you will find a 8-SMD, Gull Wing-case to contain the op amp ic. Op amps are Isolation types of amplifier on the chip. The op amp is delivered to you in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. The op amp ic has an array of 8 pins on it. There is an input offset voltage of 600μV for this buffer op amp. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~105°C. Using a supply current of 18.5mA , this buffer op amp will be able to operate. In total, there are 1 circuits on this buffer amplifier. On the output type, there are Analog, Digital different types of op amps. The operating supply voltage of instrumentation amplifier is rated 5V voltage.
ACPL-790A-500E Features
supply voltage of 5V
Output Type: Analog, Digital
ACPL-790A-500E Applications
There are a lot of Broadcom Limited ACPL-790A-500E Instrumentational OP Amps applications.
- Comparator
- Scintillation detectors
- RF cable systems
- Navigation
- Switching amplifier
- Large motor controllers
- Instrumentation
- Voltage regulation circuit
- ECG equipment
- Biopotential
