ACPL-C78A-500E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.268, 6.81mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | ACPL-C78A |
| Output Type | Differential |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 11mA |
| Nominal Supply Current | 16mA |
| Slew Rate | 10000 V/μs |
| Amplifier Type | Isolation |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Output Current per Channel | 18.6mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 100 kHz |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 300μV |
| -3db Bandwidth | 100MHz |
| Isolation Voltage | 5kV |
| Voltage Gain-Min | 7.92 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ACPL-C78A-500E Overview
There is a 8-SOIC (0.268, 6.81mm Width) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called Isolation-types. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. There are 8 pins on this chip. The input offset voltage is 300μV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using a supply current of 11mA , this buffer op amp will be able to operate. Buffer op amp is equipped with 1 channels on the device. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Differential signals. A voltage gain of 7.92 is the minimum this op amp can achieve.
ACPL-C78A-500E Features
supply voltage of 5V
Output Type: Differential
ACPL-C78A-500E Applications
There are a lot of Broadcom Limited ACPL-C78A-500E Instrumentational OP Amps applications.
- Ultrasound transducers
- Tablets
- Active probe
- Biopotential
- Subtraction operation circuits
- Cinema or auditorium audio system
- Large motor controllers
- Medical instruments
- Vehicle electronics
- Gaming industry
