ACPL-C79A-000E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.268, 6.81mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ACPL-C79* |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Power Supplies | 3.3/55V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Operating Supply Current | 13mA |
| Nominal Supply Current | 13mA |
| Power Dissipation | 600mW |
| Forward Current | 230mA |
| Slew Rate | 15000 V/μs |
| Amplifier Type | Isolation |
| Current - Input Bias | 100nA |
| Max Input Voltage | 200mV |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Output Current per Channel | 11mA |
| Input Offset Voltage (Vos) | 600μV |
| Bandwidth | 200 kHz |
| Supply Voltage Limit-Max | 5.5V |
| -3db Bandwidth | 200MHz |
| Isolation Voltage | 5kV |
| Height | 3.18mm |
| Length | 5.85mm |
| Width | 6.807mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ACPL-C79A-000E Overview
There is a 8-SOIC (0.268, 6.81mm Width) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. Please take in mind that this instrumentation amplifier should be run at 5V. 8 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 600μV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~105°C. An 13mA volt supply current is needed for this linear amplifier to operate. During the manufacturing process, this buffer amplifier is divided into 1 circuits. The op amp ic has 2 channels on it. On the output type, there are Differential different types of op amps.
ACPL-C79A-000E Features
supply voltage of 5V
Output Type: Differential
ACPL-C79A-000E Applications
There are a lot of Broadcom Limited ACPL-C79A-000E Instrumentational OP Amps applications.
- High gain DC amplifier
- pH (acidity)
- Switching amplifier
- Video data acquisition
- Broadcasting
- Home audio systems
- PDA
- Strain gauges
- Power control
- Inverse/same-phase proportional circuit
