ACPL-C87BT-000E
| Parameters | |
|---|---|
| Bandwidth | 100 kHz |
| Voltage - Input Offset | 300μV |
| Input Current | 15mA |
| Isolation Voltage | 5kV |
| Ambient Temperature Range High | 125°C |
| Height | 3.607mm |
| Length | 5.85mm |
| Width | 6.807mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.268, 6.81mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | ACPL-C87 |
| Output Voltage | 5.5V |
| Output Type | Differential |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 10.5mA |
| Nominal Supply Current | 10.5mA |
| Propagation Delay | 6 μs |
| Turn On Delay Time | 7 μs |
| Forward Current | 230mA |
| Amplifier Type | Isolation |
| Current - Input Bias | 1nA |
| Voltage - Supply, Single/Dual (±) | 3V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | -300μV |
ACPL-C87BT-000E Overview
There is a 8-SOIC (0.268, 6.81mm Width) case package that contains the instrumentation amplifiers. This is a Isolation type op amp. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. The input offset voltage is -300μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 10.5mA and 10 . The buffer amp consists of 1 circuits in total. One of the many benefits of this op amp ic is that it emits Differential signals. It should be noted that the other type of analog integrated circuit used in this instrumentation amplifier is known as the ANALOG CIRCUIT.
ACPL-C87BT-000E Features
supply voltage of 5V
Output Type: Differential
ACPL-C87BT-000E Applications
There are a lot of Broadcom Limited ACPL-C87BT-000E Instrumentational OP Amps applications.
- Television
- Mobile phone
- Biopotential
- Polarized electrodes
- Test equipment
- Hand-held batteries
- Thermocouples
- Instrumentation
- RF cable systems
- earphone
