ACS710KLATR-12CB-NL-T
| Parameters | |
|---|---|
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BICMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | DC~120kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | Ratiometric, Voltage |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 11mA |
| Polarization | Bidirectional |
| Max Supply Current | 14.5mA |
| Accuracy | ±2.2% |
| Response Time | 4μs |
| Sensor Type | Hall Effect, Open Loop |
| Linearity | ±0.75% |
| For Measuring | AC/DC |
| Current - Sensing | 12.5A |
| Sensitivity (mV/A) | 56 mV/A |
| Height Seated (Max) | 2.65mm |
ACS710KLATR-12CB-NL-T Overview
For safety reasons, the current sensors are packaged in 16-SOIC (0.295, 7.50mm Width) packages. For protection, these current sensors are packaged in a Tape & Reel (TR). There should be no current greater than 14.5mA coming from current sensors. A 16 termination is found on the current sensors. The current sensor has 16 pins. While working, these sensors can supply a voltage of 5V. The minimum voltage supplied by current sensors should be set to 3V. Current sensors, however, should not supply voltages greater than 5.5V. In operation, these electronic components should supply 11mA of current.
ACS710KLATR-12CB-NL-T Features
Moisture Sensitivity Level: 3 (168 Hours)
Operating Temperature: -40°C~125°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 3V~5.5V
Frequency: DC~120kHz
Sensing Current: 12.5A
16-SOIC (0.295, 7.50mm Width) Package
ACS710KLATR-12CB-NL-T Applications
There are a lot of Allegro MicroSystems ACS710KLATR-12CB-NL-T Current Sensors applications.
- Power factor correction
- AC variabel speed drives and servo motor drives
- Uninterruptable Power Supllies (UPS)
- Power Supplies for welding applications
- Static converters for DC motor drives
- General purpose inverters
- Switched Mode Power Supplies (SMPS)
- Monitor Motor Operation
- Proving Switch
- Battery supplied applications
