Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Cut Tape (CT) |
Published |
2011 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Other Sensors/Transducers |
Voltage - Supply |
3V~5.5V |
Frequency |
DC~100kHz |
Output |
Ratiometric, Voltage |
Operating Supply Voltage |
3.3V |
Number of Channels |
1 |
Termination Type |
SOLDER |
Polarization |
Bidirectional |
Max Supply Current |
5.5mA |
Quiescent Current |
4mA |
Accuracy |
±5% |
Response Time |
4.6μs |
Bandwidth |
100 kHz |
Sensor Type |
Hall Effect, Open Loop |
-3db Bandwidth |
100 kHz |
Linearity |
±1% |
Sensors/Transducers Type |
PROXIMITY SENSOR,HALL EFFECT |
For Measuring |
AC/DC |
Current - Sensing |
25A |
Sensitivity (mV/A) |
55 mV/A |
Height |
1.5mm |
Length |
4.9mm |
Width |
3.9mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
ACS711KLCTR-25AB-T Overview
Safety measures are taken to protect the current sensors by putting them in 8-SOIC (0.154, 3.90mm Width) packages. It is designed to protect the current sensors from damage by packaging them in the Cut Tape (CT). A current sensor should provide a current no greater than 5.5mA. Currently, the current sensors terminate at 8. Currently, this sensor has 8 pins. It is possible for the current sensors to provide 3.3V voltage when they are operating.
ACS711KLCTR-25AB-T Features
Moisture Sensitivity Level: 2 (1 Year)
Operating Temperature: -40°C~125°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 3V~5.5V
Frequency: DC~100kHz
Sensing Current: 25A
8-SOIC (0.154, 3.90mm Width) Package
ACS711KLCTR-25AB-T Applications
There are a lot of Allegro MicroSystems ACS711KLCTR-25AB-T Current Sensors applications.
- Static converters for for DC motor drives
- Switched Mode Power Supplies (SMPS)
- Uninterruptable Power Supllies (UPS)
- Overcurrent protection
- Switched Mode Power Supplies(SMPS)
- Monitor Motor Operation
- Battery chargers and systems
- DC and AC power monitoring
- Power factor correction
- Continuity