ACS714ELCTR-20A-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BICMOS |
| Voltage - Supply | 5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | DC~80kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Output | Ratiometric, Voltage |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Polarization | Bidirectional |
| Max Supply Current | 13mA |
| Quiescent Current | 10mA |
| Response Time | 3.5μs |
| Bandwidth | 80 kHz |
| Sensor Type | Hall Effect, Open Loop |
| Linearity | ±1.5% |
| For Measuring | AC/DC |
| Current - Sensing | 20A |
| Sensitivity (mV/A) | 100 mV/A |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
ACS714ELCTR-20A-T Overview
To ensure the safety of the current sensors, they are packaged in 8-SOIC (0.154, 3.90mm Width) packages. Current sensors are packaged in the Tape & Reel (TR) for protection. Current sensors should supply no more current than 13mA. Sensors with 8 terminations measure current. A current sensor has 8 pins. While working, these sensors can supply a voltage of 5V. Current sensors must supply 4.5V as their minimum voltage. It is important, however, to keep the voltage supplied by current sensors below 5.5V. The electronic part has a pin count of 8.
ACS714ELCTR-20A-T Features
Moisture Sensitivity Level: 2 (1 Year)
Operating Temperature: -40°C~85°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 5V
Frequency: DC~80kHz
Sensing Current: 20A
8-SOIC (0.154, 3.90mm Width) Package
ACS714ELCTR-20A-T Applications
There are a lot of Allegro MicroSystems ACS714ELCTR-20A-T Current Sensors applications.
- Switched Mode Power Supplies (SMPS)
- Uninterruptable Power Supllies (UPS)
- Closed-L oop DC- and AC-Current Sensor Modules
- Power factor correction
- Power supplies for welding applications
- AC variabel speed drives and servo motor drives
- Electrical drives
- Frequency, Voltage, and Solar Inverters
- Static converters for DC motor drives
- Battery chargers and systems
