ACS715LLCTR-20A-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BICMOS |
| Voltage - Supply | 5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | DC~80kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Output | Ratiometric, Voltage |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Polarization | Unidirectional |
| Output Current | 10mA |
| Max Supply Current | 13mA |
| Quiescent Current | 10mA |
| Response Time | 3.5μs |
| Bandwidth | 80 kHz |
| Sensor Type | Hall Effect, Open Loop |
| Linearity | ±1.5% |
| For Measuring | DC |
| Current - Sensing | 20A |
| Sensitivity (mV/A) | 185 mV/A |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
ACS715LLCTR-20A-T Overview
For safety reasons, the current sensors are enclosed in 8-SOIC (0.154, 3.90mm Width) packages. A protective Tape & Reel (TR) is placed over these current sensors in order to prevent damage to the devices. In order for current sensors to be effective, their current supply should not exceed 13mA. Current sensors terminate at 8. Current sensors have 8 pins. When they operate, current sensors can supply 5V voltage. There is a possibility that these current sensors will supply a voltage of 5V while they are working. Pins 8 are present on this electronic component. The current output from current sensors should be 10mA.
ACS715LLCTR-20A-T Features
Moisture Sensitivity Level: 2 (1 Year)
Operating Temperature: -40°C~150°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 5V
Frequency: DC~80kHz
Sensing Current: 20A
8-SOIC (0.154, 3.90mm Width) Package
ACS715LLCTR-20A-T Applications
There are a lot of Allegro MicroSystems ACS715LLCTR-20A-T Current Sensors applications.
- Battery chargers and systems
- Overcurrent Detection
- Power factor correction
- Home Automation
- Switched Mode Power Supplies (SMPS)
- Uninterruptible Power Supplies(UPS)
- DC motor drives
- Power supply management
- General purpose inverters
- Overcurrent protection
