banner_page

ACS724LLCTR-20AU-T

ACS724LLCTR-20AU-T datasheet pdf and Current Sensors product details from Allegro MicroSystems stock available at Noco


  • Manufacturer: Allegro MicroSystems
  • Nocochips NO: 26-ACS724LLCTR-20AU-T
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 894
  • Description: ACS724LLCTR-20AU-T datasheet pdf and Current Sensors product details from Allegro MicroSystems stock available at Noco(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~150°C
Packaging Tape & Reel (TR)
Published 2015
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
Terminal Finish Matte Tin (Sn)
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Frequency 120kHz
Time@Peak Reflow Temperature-Max (s) 40
Output Ratiometric, Voltage
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 4.5V
Number of Channels 1
Analog IC - Other Type ANALOG CIRCUIT
Operating Supply Current 10mA
Polarization Unidirectional
Max Supply Current 14mA
Accuracy ±0.7%
Response Time 4μs
Sensor Type Hall Effect, Open Loop
Linearity ±1.5%
Sensing Method Hall Effect
Sensitivity 200mv/A
For Measuring DC
Max Junction Temperature (Tj) 165°C
Ambient Temperature Range High 150°C
Current - Sensing 20A
Sensitivity (mV/A) 200 mV/A
Height 1.75mm
Length 4.9mm
Width 3.9mm
RoHS Status ROHS3 Compliant

ACS724LLCTR-20AU-T Overview


As a safety precaution, current sensors are placed in 8-SOIC (0.154, 3.90mm Width) packages. In order to protect these current sensors, the Tape & Reel (TR) is used to protect them. Current sensors should not provide currents greater than 14mA. Currently, the sensors have 8 terminations. As far as the current sensor is concerned, it has 8 pins. While working, these current sensors can supply a voltage of 5V. In order to ensure proper operation of current sensors, the minimum voltage should be set to 4.5V. However, the voltage supplied by current sensors should not exceed 5.5V. This electronic component should operate at a current of 10mA.

ACS724LLCTR-20AU-T Features


Moisture Sensitivity Level: 2 (1 Year)
Operating Temperature: -40°C~150°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 4.5V~5.5V
Frequency: 120kHz
Sensing Current: 20A
8-SOIC (0.154, 3.90mm Width) Package

ACS724LLCTR-20AU-T Applications


There are a lot of Allegro MicroSystems ACS724LLCTR-20AU-T Current Sensors applications.

  • Uninterruptible Power Supplies(UPS)
  • Electrical drives
  • AC variabel speed drives and servo motor drives
  • Continuity
  • Power supply management
  • Switched Mode Power Supplies(SMPS)
  • Uninterruptable Power Supllies (UPS)
  • Closed-L oop DC- and AC-Current Sensor Modules
  • Power factor correction
  • Battery supplied applications

Write a review

Note: HTML is not translated!
    Bad           Good