Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~150°C |
Packaging |
Tape & Reel (TR) |
Published |
2015 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
Terminal Finish |
Matte Tin (Sn) |
Technology |
BICMOS |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Frequency |
DC~120kHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Output |
Ratiometric, Voltage |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Channels |
1 |
Analog IC - Other Type |
ANALOG CIRCUIT |
Polarization |
Unidirectional |
Max Supply Current |
14mA |
Quiescent Current |
10mA |
Accuracy |
±0.9% |
Response Time |
4μs |
Bandwidth |
120 kHz |
Sensor Type |
Hall Effect, Differential |
Linearity |
±1.5% |
For Measuring |
DC |
Current - Sensing |
10A |
Sensitivity (mV/A) |
264 mV/A |
Length |
4.9mm |
RoHS Status |
ROHS3 Compliant |
ACS725LLCTR-10AU-T Overview
For safety reasons, the current sensors are packaged in 8-SOIC (0.154, 3.90mm Width) packages. To protect the current sensors against damage, they have been packaged in the Tape & Reel (TR). It is recommended that current sensors provide a current that is not greater than 14mA. Currently, the current sensors are terminated with 8. In this current sensor, there are 8 pins. While working, these current sensors can supply voltage of 3.3V. By default, current sensors should provide a voltage of 3V. However, the voltage supplied by current sensors should not exceed 3.6V.
ACS725LLCTR-10AU-T Features
Moisture Sensitivity Level: 2 (1 Year)
Operating Temperature: -40°C~150°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Differential
Supply Voltage: 3V~3.6V
Frequency: DC~120kHz
Sensing Current: 10A
8-SOIC (0.154, 3.90mm Width) Package
ACS725LLCTR-10AU-T Applications
There are a lot of Allegro MicroSystems ACS725LLCTR-10AU-T Current Sensors applications.
- Static converters for DC motor drives
- Inverter and H-bridge current measurements
- Switched Mode Power Supplies (SMPS)
- Battery supplied applications
- Overcurrent Detection
- Proving Switch
- Uninterruptible Power Supplies(UPS)
- Motor and load control
- Switched Mode Power Supplies(SMPS)
- AC variable speed drives