ACS726LLFTR-40B-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | DC~120kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | Ratiometric, Voltage |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Polarization | Bidirectional |
| Max Supply Current | 40mA |
| Quiescent Current | 22mA |
| Accuracy | ±1% |
| Response Time | 5μs |
| Bandwidth | 120 kHz |
| Sensor Type | Hall Effect, Open Loop |
| Linearity | ±0.5% |
| For Measuring | AC/DC |
| Current - Sensing | 40A |
| Sensitivity (mV/A) | 50 mV/A |
| Length | 8.66mm |
| RoHS Status | ROHS3 Compliant |
ACS726LLFTR-40B-T Overview
To ensure the safety of the current sensors, they are packaged in 24-SSOP (0.154, 3.90mm Width) packages. These current sensors are packaged in the Tape & Reel (TR) to protect the devices from damage. Current sensors should not supply a current greater than 40mA. In the current sensors, the terminations are 24. There are 24 pins in this current sensor. It is possible for these current sensors to supply a voltage of 3.3V while they are functioning. Current sensors should be configured to supply a voltage of 3V as a minimum. But the voltage supplied by current sensors should not exceed 3.6V.
ACS726LLFTR-40B-T Features
Moisture Sensitivity Level: 2 (1 Year)
Operating Temperature: -40°C~150°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 3V~3.6V
Frequency: DC~120kHz
Sensing Current: 40A
24-SSOP (0.154, 3.90mm Width) Package
ACS726LLFTR-40B-T Applications
There are a lot of Allegro MicroSystems ACS726LLFTR-40B-T Current Sensors applications.
- Power Supplies for welding applications
- Inverter and H-bridge current measurements
- Battery supplied applications
- AC variabel speed drives and servo motor drives
- DC and AC power monitoring
- Proving Switch
- Closed-L oop DC- and AC-Current Sensor Modules
- Battery chargers and systems
- OEM Current Sensing
- Switched Mode Power Supplies(SMPS)
