ACS758ECB-200U-PFF-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 5-CB Formed Leads, PFF |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BICMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | UNSPECIFIED |
| Terminal Form | UNSPECIFIED |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | DC~120kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Output | Ratiometric, Voltage |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Polarization | Unidirectional |
| Output Current | 1mA |
| Max Supply Current | 13.5mA |
| Quiescent Current | 10mA |
| Accuracy | ±1.2% |
| Response Time | 4μs |
| Bandwidth | 120 kHz |
| Sensor Type | Hall Effect, Open Loop |
| Linearity | ±1% |
| For Measuring | DC |
| Current - Sensing | 200A |
| Sensitivity (mV/A) | 20 mV/A |
| Height | 7mm |
| Length | 10mm |
| Width | 13mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ACS758ECB-200U-PFF-T Overview
To ensure safety, current sensors are encapsulated in 5-CB Formed Leads, PFF packages. It is designed to protect the current sensors from damage by packaging them in the Tube. There should be no current greater than 13.5mA coming from current sensors. Current sensors have terminations of 5. As far as this current sensor is concerned, there are only 5 pins. As long as the current sensors are operating, they could supply a voltage of 5V. The current sensors are capable of supplying voltages of 5V while in operation. ldeally, current sensors should supply 3V voltage. The pin count of this electronic component is 5. Sensors that measure current should output 1mA.
ACS758ECB-200U-PFF-T Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -40°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 3V~5.5V
Frequency: DC~120kHz
Sensing Current: 200A
5-CB Formed Leads, PFF Package
ACS758ECB-200U-PFF-T Applications
There are a lot of Allegro MicroSystems ACS758ECB-200U-PFF-T Current Sensors applications.
- Static converters for DC motor drives
- Overcurrent Detection
- Battery chargers and systems
- Electrical drives
- Continuity
- DC and AC power monitoring
- Switched Mode Power Supplies (SMPS)
- Static converters for for DC motor drives
- Proving Switch
- Leakage Current Sensors
