ACS770LCB-100U-PFF-T
| Parameters | |
|---|---|
| Bandwidth | 120 kHz |
| Sensor Type | Hall Effect, Open Loop |
| Linearity | ±1% |
| Sensors/Transducers Type | MAGNETIC FIELD SENSOR,HALL EFFECT |
| For Measuring | DC |
| Current - Sensing | 100A |
| Sensitivity (mV/A) | 40 mV/A |
| Height | 7mm |
| Length | 14mm |
| Width | 13mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 5-CB Formed Leads, PFF |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C |
| Packaging | Tube |
| Published | 2013 |
| Series | ACS770 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 4700Ohm |
| Subcategory | Other Sensors/Transducers |
| Technology | BICMOS |
| Voltage - Supply | 5V |
| Frequency | DC~120kHz |
| Output | Ratiometric, Voltage |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Termination Type | SOLDER |
| Polarization | Unidirectional |
| Max Supply Current | 15mA |
| Quiescent Current | 10mA |
| Accuracy | ±0.6% |
| Response Time | 4.6μs |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
ACS770LCB-100U-PFF-T Overview
Current sensors are packaged in 5-CB Formed Leads, PFF packages to ensure their safety. In order to protect these current sensors, the Tube is used to protect them. In order for current sensors to be effective, their current supply should not exceed 15mA. Currently, the current sensors are terminated with 5. This current sensor has 5 pins.
ACS770LCB-100U-PFF-T Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -40°C~150°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 5V
Frequency: DC~120kHz
Sensing Current: 100A
5-CB Formed Leads, PFF Package
ACS770LCB-100U-PFF-T Applications
There are a lot of Allegro MicroSystems ACS770LCB-100U-PFF-T Current Sensors applications.
- Continuity
- Overcurrent protection
- Overcurrent Detection
- DC and AC power monitoring
- Power factor correction
- Switched Mode Power Supplies (SMPS)
- Electrical drives
- Industrial Monitoring and Control Systems
- Battery supplied applications
- Battery chargers and systems
