AD1938WBSTZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Weight | 181.692094mg |
| Operating Temperature | -40°C~105°C |
| Packaging | Tray |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD1938 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Number of Channels | 12 |
| Interface | I2C, SPI, Serial |
| Max Supply Voltage | 5V |
| Min Supply Voltage | 3.3V |
| Operating Supply Current | 56mA |
| Data Interface | Serial |
| Sampling Rate | 192 ksps |
| Voltage - Supply, Analog | 3V~3.6V |
| Voltage - Supply, Digital | 3V~3.6V |
| Input Bit Code | BINARY |
| Number of A/D Converters | 4 |
| Signal to Noise Ratio (SNR) | 107 dB |
| Number of D/A Converters | 8 |
| Resolution (Bits) | 24 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 4 / 8 |
| Dynamic Range, ADCs / DACs (db) Typ | 105 / 106 |
| S/N Ratio, ADCs / DACs (db) Typ | 94 / 94 |
| Height | 1.45mm |
| Length | 7.2mm |
| Width | 7.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD1938WBSTZ Overview
A 48-LQFP package is supplied for space savings. The packaging way of Tray is adopted. This electronic component is of the type General Purpose, allowing it to provide high-efficiency performance in various applications. The mounting type of this device is Surface Mount. A -40°C~105°C operating performance setting allows it to operate normally. It is integrated with 4 / 8 ADCs / DACs. Supply voltage is 3V~3.6V for the analog circuit. Supply voltage is set to 3V~3.6V for the digital circuit. Transmission lines have 48 terminations to prevent signals from reflecting. In terms of electronics, it is a 48-pin device. It is configured with 48 pins. Using its base part number AD1938, it can be used to locate parts that are related. Based on the Surface Mount technology, the module is mounted to a PCB. 5V is the maximum value of supply voltage. There are 4 A/D converters used to convert the analog signals into digital signals. Supply voltage should be maintained at 3.3V. The device operates with a supply voltage of 3.3V. Often in the process of converting digital signals into analog signals, there are 8 D/A converters. The data transmission channel count is 12. A wide range of applications can be met by this electronic component belonging to the Automotive series. The supply voltage is 56mA.
AD1938WBSTZ Features
Embedded in the 48-LQFP package
Operating temperature of -40°C~105°C
4 / 8 ADCs / DACs
4 A/D converters
Operating supply current of 56mA
AD1938WBSTZ Applications
There are a lot of Analog Devices Inc. AD1938WBSTZ CODECs Interface ICs applications.
- Conveying
- Microprocessor
- Dimensionality reduction
- Image denoising
- Multi-axis control
- Off-Highway Vehicles (OHV)
- Sawmills
- Data distribution
- Logical circuits
- Electronic circuits
