AD1939YSTZ
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Weight | 342.689036mg |
| Operating Temperature | -40°C~105°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 192kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD1939 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Number of Channels | 16 |
| Interface | I2C, SPI, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Number of Bits | 24 |
| Data Interface | Serial |
| Sampling Rate | 192 ksps |
| Voltage - Supply, Analog | 3V~3.6V |
| Voltage - Supply, Digital | 3V~3.6V |
| Number of A/D Converters | 4 |
| Signal to Noise Ratio (SNR) | 107 dB |
| Number of D/A Converters | 8 |
| Resolution (Bits) | 24 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 4 / 8 |
| Dynamic Range, ADCs / DACs (db) Typ | 105 / 110 |
| S/N Ratio, ADCs / DACs (db) Typ | 94 / 94 |
| Height | 1.4mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD1939YSTZ Overview
A 64-LQFP package is supplied for space savings. Tray is the packaging method used. The high-efficiency performance of this electronic part can be achieved in various applications due to its type of General Purpose. Mounting type Surface Mount is used. It is able to operate normally when the operating performance is set at -40°C~105°C. In addition, it is equipped with 4 / 8 ADCs and DACs. The analog circuit is powered by 3V~3.6V. 3V~3.6V is the supply voltage for the digital circuit. In order to avoid reflections off the end of the transmission line, 64 terminations are used. This is a 64-pin electronic device. There are 64 pins on it. Its base part number AD1939 can be used to find other parts that are related. An integrated circuit is mounted on a PCB based on the technology of Surface Mount. 5.5V should be the maximum value of the supply voltage. Digital signals are converted from analog signals using 4 A/D converters. The minimum value of supply voltage should be maintained at 3V. A voltage of 3.3V is required to operate the device. Powered by a 5V supply voltage, it can run. Digital signals are converted into analog signals using 8 D/A converters. Transmission of data is through 16 channels. Information is stored using 24 bits.
AD1939YSTZ Features
Embedded in the 64-LQFP package
Operating temperature of -40°C~105°C
4 / 8 ADCs / DACs
4 A/D converters
AD1939YSTZ Applications
There are a lot of Analog Devices Inc. AD1939YSTZ CODECs Interface ICs applications.
- Missing value imputation
- Textiles
- Semiconductor fabrication
- RF-based home automation system
- Detecting interrupts in microprocesstor applications
- Data distribution
- Robotics
- Filling
- Magnetic positional control
- Linear distance measurement
