AD204JY
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 38-SIP, 10 Leads, Offset Leads |
| Number of Pins | 10 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Resistance | 2GOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Technology | HYBRID |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | AD204 |
| Pin Count | 10 |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Number of Circuits | 4 |
| Amplifier Type | Isolation |
| Common Mode Rejection Ratio | 130 dB |
| Current - Input Bias | 30pA |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 15mV |
| Bandwidth | 5 kHz |
| Voltage Gain | 40dB |
| -3db Bandwidth | 5MHz |
| Isolation Voltage | 750V |
| Input Voltage Noise Density | 50nV/sqrt Hz |
| Height | 15.9mm |
| Length | 52.8mm |
| Width | 6.3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD204JY Overview
The linear amplifier is packaged in a 38-SIP, 10 Leads, Offset Leads case. Isolation-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tube case. It is estimated that there will be 10 terminations in the next few months. There are a total of 10 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 15V. 10 pins are available on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 15mV. This electronic part is recommended for mounting type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . Voltage gain should remain at 40dB. During the manufacturing process, this buffer amplifier is divided into 4 circuits. 1 elements make up the design of this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 15V voltage. It is recommended to keep the instrumentation amplifier resistance within the range of 2GOhm.
AD204JY Features
10 Pins
supply voltage of 15V
40dB voltage gain
Resistance of 2GOhm
AD204JY Applications
There are a lot of Analog Devices Inc. AD204JY Instrumentational OP Amps applications.
- Differentiator circuits
- ECG equipment
- Weak signal detection
- Radiation thermometry transducers
- Signal amplification
- Commercial audio systems
- Home audio systems
- Active probe
- Information processing
- Comparator
