AD215BY
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 44-SIP, 12 Leads, Offset Leads |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 15 |
| ECCN Code | EAR99 |
| Resistance | 2GOhm |
| Technology | HYBRID |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | AD215 |
| Pin Count | 12 |
| Number of Elements | 1 |
| Operating Supply Current | 40mA |
| Nominal Supply Current | 40mA |
| Response Time | 9 μs |
| Slew Rate | 6V/μs |
| Amplifier Type | Isolation |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 300pA |
| Voltage - Supply, Single/Dual (±) | ±14.25V~17V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 400μV |
| Bandwidth | 120 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 20dB |
| Dual Supply Voltage | 15V |
| Isolation Voltage | 1.5kV |
| Height | 21.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD215BY Overview
A 44-SIP, 12 Leads, Offset Leads case is used to package the op amp. The instrumentation amplifier in this picture is of the Isolation-type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. We are approaching the 15h termination of the year. Buffer amplifier has a total of 12 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. Linear amplifier includes 12 pins. Regarding input offset voltage, buffer amplifier rates 400μV voltage. This electronic part is recommended for mounting type Through Hole. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 40mA and 10 . There should be no change in the voltage gain. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. Op amp resistance should stay within the range of 2GOhm.
AD215BY Features
12 Pins
supply voltage of 15V
20dB voltage gain
Resistance of 2GOhm
AD215BY Applications
There are a lot of Analog Devices Inc. AD215BY Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Home audio systems
- Addition operation circuits
- earphone
- pH (acidity)
- Medical imaging
- Power control
- Commercial audio systems
- Radar
- Signal filtering
