AD524AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Resistance | 1GOhm |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Power Dissipation | 450mW |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | AD524 |
| Pin Count | 16 |
| Number of Circuits | 1 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 3.5mA |
| Power Dissipation | 450mW |
| Slew Rate | 5V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | ±6V~18V |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| -3db Bandwidth | 1MHz |
| Dual Supply Voltage | 15V |
| Voltage Gain-Min | 1 |
| Number of Amplifiers | 5 |
| Voltage Gain-Nom | 10 |
| Height | 3.56mm |
| Length | 21.34mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD524AD Overview
Packaged in a 16-CDIP (0.300, 7.62mm) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the Instrumentation-type. Instrumentation amplifier is delivered in a Tube case. Buffer amplifier has a total of 16 pins. This linear amplifier should be powered by an 15V battery. In total, the buffer amplifier consists of 16 pins. Op amp ic rates 250μV for input offset voltage. Through Hole is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of -25°C~85°C . Using an 5mA supply current, this operational amplifier ics can be operated. This op amp ic has 1 circuits. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 1. Linear amplifier resistance should stay within the range of 1GOhm. There are 5 amplifiers on the op amp.
AD524AD Features
16 Pins
supply voltage of 15V
Resistance of 1GOhm
AD524AD Applications
There are a lot of Analog Devices Inc. AD524AD Instrumentational OP Amps applications.
- Semiconductor detectors
- Subtraction operation circuits
- Multiplication circuits
- Car stereo
- Oscilloscopes
- Band-pass filter
- Signal filtering
- Radar
- High/low-pass filter circuit
- Power transmission
