AD532JDZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Analog Computational Functions |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Supply Voltage | 15V |
| Base Part Number | AD532 |
| Function | Analog Multiplier/Divider |
| Output Voltage | 10V |
| Operating Supply Voltage | 15V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 10V |
| Analog IC - Other Type | ANALOG MULTIPLIER OR DIVIDER |
| Operating Supply Current | 6mA |
| Number of Bits | 4 |
| Accuracy | 1 % |
| Slew Rate | 45 V/μs |
| Max Input Voltage | 10V |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Settling Time | 1 μs |
| Max Dual Supply Voltage | 18V |
| -3db Bandwidth | 1MHz |
| Max Frequency | 1MHz |
| Min Dual Supply Voltage | 10V |
| Dual Supply Voltage | 15V |
| Number of Amplifiers | 3 |
| Number of Bits/Stages | 4-Quadrant |
| Height | 5.08mm |
| Length | 19.94mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD532JDZ Overview
Packing materials Tube are used.Embedded in the 14-CDIP (0.300, 7.62mm) package, it is cost-effective.There is a considerable amount of use of 4-Quadrant bits per stage.For its operation, a voltage of 15V is applied.This device is supplied with a nominally negative voltage of -15V.The frequency range of 1MHz is occupied by a modulated radio-frequency signal.Based on its base part number AD532, an array of electronic parts with a number of similarities can be found.It is a type of 14-pin electronic component that is renowned for its high quality and superior performance.In the subcategory Analog Computational Functions, it belongs to the category of electronic devices.Using the Through Hole method, it is mounted on the PCB.A maximum temperature of 70°C should be maintained for the electronic device to operate.A minimum temperature of 0°C should be maintained for the operation of the electronic device.As a result, it is ideal for a supply voltage of 6mA.For a dual supply, this voltage should be higher than 10V.If the dual supply voltage is lower than 18V, then it is recommended.ANALOG MULTIPLIER OR DIVIDER operates as an analog integrated circuit.An modulated radio-frequency signal occupies the frequency range of 1MHz.The device is capable of supporting the maximum voltage input of 10V, which allows designers to take full advantage of its flexibility.A dual supply voltage of 15V is used to operate it.There is the possibility of storing 4 bits of information.It is able to operate from the supply voltage of 15V.At 18V, the maximum supply voltage is limited.For normal operation, the minimum supply voltage is maintained at 10V.As a precaution, the frequency should not exceed 1MHz.In order to achieve high efficiency, there are a number of 3 amplifiers working in concert.10V is the voltage released from the output end.To achieve its specific functions, it is designed with 1 circuits.
AD532JDZ Features
Supplied in the 14-CDIP (0.300, 7.62mm) package
Bandwidth of 1MHz
Operating supply current of 6mA
Operating supply voltage of 15V
3 amplifiers
AD532JDZ Applications
There are a lot of Analog Devices Inc. AD532JDZ Analog Multipliers & Dividers applications.
- High/low-pass filter circuit
- Radiation thermometry transducers
- Automation control systems
- Weak signal detection
- ECG equipment
- Ultrasound transducers
- Industrial control system
- Automotive sensors
- Proportional operation circuits
- Television
