AD532SH
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | TO-100-10 Metal Can |
| Number of Pins | 10 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Supply Voltage | 15V |
| Base Part Number | AD532 |
| Function | Analog Multiplier/Divider |
| Output Voltage | 10V |
| Operating Supply Voltage | 22V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG MULTIPLIER OR DIVIDER |
| Operating Supply Current | 6mA |
| Nominal Supply Current | 6mA |
| Max Supply Current | 6mA |
| Number of Bits | 4 |
| Accuracy | 1 % |
| Slew Rate | 45 V/μs |
| Max Input Voltage | 10V |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Settling Time | 1 μs |
| Max Dual Supply Voltage | 22V |
| -3db Bandwidth | 1MHz |
| Max Frequency | 1MHz |
| Min Dual Supply Voltage | 10V |
| Dual Supply Voltage | 15V |
| Number of Bits/Stages | 4-Quadrant |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD532SH Overview
In order to package the product, Bulk is used.In order to maximize cost efficiency, it is embedded in the TO-100-10 Metal Can package.There is a tendency to use 4-Quadrant bits per stage.In order to operate it, a voltage of 15V is applied.In this case, the supply voltage is nominally negative and referred to as -15V.An modulated radio-frequency signal occupies the frequency range of 1MHz.In order to prevent signals from reflecting off the end of the transmission line, 10 terminations are installed.A number of electronic parts with a similar part number can be found under AD532.It is a type of 10-pin electronic component that is renowned for its high quality and superior performance.For mounting the component on the PCB, Through Hole is used.Electronic devices should be kept at 125°C degrees Celsius at all times.Electronic devices should be operated at a minimum temperature of -55°C.The operating supply voltage of 6mA makes it ideal for this device.The dual supply voltage should be higher than 10V.In general, dual supply voltages should be lower than 22V.In its analog IC form, ANALOG MULTIPLIER OR DIVIDER performs as an integrated circuit.An modulated radio-frequency signal occupies the frequency range of 1MHz.Designed to support a maximum input voltage of 10V, it offers designers a wide range of flexibility in their designs.The unit operates on a dual supply voltage of 15V.It is possible to store information in 4 bits.A voltage of 22V can be used to supply power to the device.It is recommended that the frequency should not exceed 1MHz to prevent failures.The voltage released from the output end is 10V.This device uses 1 circuits to achieve its specific functions.By maintaining the supply current below 6mA, high reliability can be achieved.
AD532SH Features
Supplied in the TO-100-10 Metal Can package
Bandwidth of 1MHz
Operating supply current of 6mA
Operating supply voltage of 22V
AD532SH Applications
There are a lot of Analog Devices Inc. AD532SH Analog Multipliers & Dividers applications.
- ECG equipment
- E-book readers
- Band-pass filter
- Measurements of Wheatstone bridge
- Medical imaging
- High input resistance broadband
- Hand-held batteries
- Comparator
- Precision measurement
- PDA
