AD532SH/883B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | TO-100-10 Metal Can |
| Number of Pins | 10 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Analog Computational Functions |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD532 |
| Function | Analog Multiplier/Divider |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 22V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Analog IC - Other Type | ANALOG MULTIPLIER OR DIVIDER |
| Operating Supply Current | 6mA |
| Number of Bits | 4 |
| Accuracy | 1 % |
| Slew Rate | 45 V/μs |
| Max Input Voltage | 10V |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Settling Time | 1 μs |
| Max Dual Supply Voltage | 22V |
| -3db Bandwidth | 1MHz |
| Min Dual Supply Voltage | 10V |
| Screening Level | MIL-STD-883 Class B |
| Dual Supply Voltage | 15V |
| Number of Bits/Stages | 4-Quadrant |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD532SH/883B Overview
Packing materials Bulk are used.For cost-effectiveness, it has been included in the TO-100-10 Metal Can package.It is common to use 4-Quadrant bits per stage.A voltage of 15V is used as the supply voltage for this device.For -15V, a nominal negative supply voltage is provided.Radio-frequency signals modulated in the range of 1MHz occupy this frequency range.A 10 termination is used to prevent signals from reflecting off the end of the transmission line.Using the part number AD532, a number of electronic components are similar in nature.It is a type of 10-pin electronic component that is known for its high quality and superior performance.It is an electronic device that can be found under the subcategory of Analog Computational Functions.A PCB is mounted by the way of Through Hole.It is recommended that the device operate at a temperature of 125°C.Temperatures below -55°C should be maintained to ensure proper operation of electronic devices.It is based on the component with the lowest tolerance for high temperatures that we determine NOT APPLICABLE's reflow temperature limit.The operating voltage of 6mA is ideal for this device.There should be a higher voltage on the dual supply than on 10V.In general, dual supply voltages should be lower than 22V.In its analog IC form, ANALOG MULTIPLIER OR DIVIDER performs as an integrated circuit.It is occupied by a modulated radio-frequency signal in the frequency range 1MHz.Due to its capability to handle a maximum input voltage of 10V, designers can make full use of its versatility.With a dual supply voltage of 15V, it operates.Information can be stored in 4 bits.A voltage of 22V is required to operate it.Elements from 1 are incorporated into it.
AD532SH/883B Features
Supplied in the TO-100-10 Metal Can package
Bandwidth of 1MHz
Operating supply current of 6mA
Operating supply voltage of 22V
AD532SH/883B Applications
There are a lot of Analog Devices Inc. AD532SH/883B Analog Multipliers & Dividers applications.
- single/dual op amp sum and difference circuits
- Micro signal measurement
- pH (acidity)
- Communication
- Thermocouples
- Ultrasound transducers
- Car stereo
- Large motor controllers
- High-frequency data acquisition systems
- Cinema or auditorium audio system
