AD534JD
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Analog Computational Functions |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Supply Voltage | 15V |
| Base Part Number | AD534 |
| Function | Analog Multiplier/Divider |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 8V |
| Analog IC - Other Type | ANALOG MULTIPLIER OR DIVIDER |
| Operating Supply Current | 6mA |
| Output Current | 30mA |
| Number of Bits | 4 |
| Accuracy | 0.25 % |
| Slew Rate | 20 V/μs |
| Max Input Voltage | 10V |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Settling Time | 2 μs |
| Max Dual Supply Voltage | 18V |
| -3db Bandwidth | 1MHz |
| Max Frequency | 1MHz |
| Min Dual Supply Voltage | 8V |
| Dual Supply Voltage | 15V |
| Number of Bits/Stages | 4-Quadrant |
| Height | 2.41mm |
| Length | 17.78mm |
| Width | 7.37mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD534JD Overview
For its packaging, Tube are used.Embedded in the 14-CDIP (0.300, 7.62mm) package, it is cost-effective.There is a tendency to use 4-Quadrant bits per stage.The device operates at a voltage of 15V.A nominal negative supply voltage of -15V is provided.There is a modulated radio-frequency signal in the range of 1MHz.There are 14 terminations designed to prevent signals from reflecting off the end of the transmission line.A number of electronic parts with a similar part number can be found under AD534.It is a type of 14-pin electronic component famous for its high quality and superior performance in the industry.It is an electronic device that falls under the subcategory of Analog Computational Functions.For mounting on the PCB, Through Hole is used.Ideally, the maximum temperature at which the electronic device can operate should be set to 70°C.A minimum operating temperature of 0°C should be maintained for the electronic device.As a result, it is ideal for a supply voltage of 6mA.8V should be higher than the dual supply voltage.Dual supply voltages should be lower than 18V.ANALOG MULTIPLIER OR DIVIDER is an analog integrated circuit type.The frequency range of 1MHz is occupied by a modulated radio-frequency signal.Hence, designers are able to make full use of its flexibility because it supports the maximum input voltage of 10V.There is a dual supply voltage of 15V on which it operates.Information can be stored in 4 bits.There is a limit to the maximum supply voltage of 18V.For normal operation, a minimum supply voltage of 8V is maintained.As a precaution, the frequency should not exceed 1MHz.A voltage-controlled output current 30mA is available.Channels 1 have been configured.
AD534JD Features
Supplied in the 14-CDIP (0.300, 7.62mm) package
Bandwidth of 1MHz
Operating supply current of 6mA
AD534JD Applications
There are a lot of Analog Devices Inc. AD534JD Analog Multipliers & Dividers applications.
- Test and measurement instruments
- Vehicle electronics
- Medical imaging
- Professional videography
- Portable media players
- Multimedia playback equipment
- Industrial applications including automation
- Biopotential
- MP3
- Voltage regulation circuit
