AD5750-1ACPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad, CSP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 108mW |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD5750 |
| Pin Count | 32 |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Operating Supply Current | 5.2mA |
| Nominal Supply Current | 5.2mA |
| Slew Rate | 2V/μs |
| Amplifier Type | Instrumentation |
| Voltage - Supply, Single/Dual (±) | ±10.8V~26.4V |
| Output Current per Channel | 24mA |
| Bandwidth | 100 kHz |
| Gain Bandwidth Product | 100 kHz |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Settling Time | 7 μs |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Dual Supply Voltage | 24V |
| Output Peak Current Limit-Nom | 0.015A |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Output Current Flow Direction | SOURCE SINK |
| Height | 950μm |
| Length | 5mm |
| Width | 4.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD5750-1ACPZ Overview
In order to protect the op amps, a 32-WFQFN Exposed Pad, CSP case is used. Op amps are Instrumentation types of amplifier on the chip. A Tray case is used for delivering the op amp. There is a growing number of terminations approaching the number of 32. In total, there are 32 pins on this op amp ic. A type of Peripheral Drivers op amp ic can be identified by the fact that this is a type of Peripheral Drivers device. It has 32 pins that make up the linear amplifier. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~105°C as far as operating temperature is concerned. A supply current of 5.2mA can be used to operate this linear amplifier. There are a total of 1 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 5.5V. BUFFER OR INVERTER BASED PERIPHERAL DRIVER is the interface IC type of the electronic part.
AD5750-1ACPZ Features
32 Pins
AD5750-1ACPZ Applications
There are a lot of Analog Devices Inc. AD5750-1ACPZ Instrumentational OP Amps applications.
- Non-polarized electrodes
- pH (acidity)
- Signal operation
- Commercial audio systems
- Vehicle electronics
- Signal filtering
- Displayers for aircraft and air transportation control systems
- Video amplifiers
- Gaming industry
- ECG equipment
