AD5750ACPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad, CSP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 108mW |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Base Part Number | AD5750 |
| Pin Count | 32 |
| Number of Circuits | 1 |
| Operating Supply Current | 5.2mA |
| Nominal Supply Current | 5.2mA |
| Slew Rate | 2V/μs |
| Amplifier Type | Instrumentation |
| Voltage - Supply, Single/Dual (±) | ±10.8V~26.4V |
| Output Current per Channel | 24mA |
| Gain Bandwidth Product | 100 kHz |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Settling Time | 7 μs |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Dual Supply Voltage | 24V |
| Output Peak Current Limit-Nom | 0.015A |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Output Current Flow Direction | SOURCE SINK |
| Number of Amplifiers | 2 |
| Height | 950μm |
| Length | 5mm |
| Width | 4.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD5750ACPZ Overview
The linear amplifier is packaged in a 32-WFQFN Exposed Pad, CSP case. Op amps are Instrumentation types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tray case. A total of 32 pins are attached to buffer op amp. A type of Peripheral Drivers buffer op amp is what this device is specifically, to be more precise. It has 32 pins that make up the linear amplifier. For this electrical component, Surface Mount is the recommended mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~105°C . A supply current of 5.2mA can be used to operate this linear amplifier. A instrumentation amplifier like this has 1 circuits. As you can see, the linear amplifier has 2 amplifiers. The electronic part's interface IC type can be classified as BUFFER OR INVERTER BASED PERIPHERAL DRIVER.
AD5750ACPZ Features
32 Pins
AD5750ACPZ Applications
There are a lot of Analog Devices Inc. AD5750ACPZ Instrumentational OP Amps applications.
- Scintillation detectors
- ECG equipment
- RF cable systems
- High-frequency data acquisition systems
- Integrator circuits
- Video computer boards
- Radiation thermometry transducers
- MP3
- Home audio systems
- Subtraction operation circuits
