AD584TH
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-99-8 Metal Can |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Bulk |
| Tolerance | ±0.14% |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Temperature Coefficient | 20ppm/°C |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Voltage References |
| Max Power Dissipation | 600mW |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | AD584 |
| Pin Count | 8 |
| Number of Outputs | 3 |
| Output Voltage | 10V |
| Output Type | Programmable |
| Max Output Current | 10mA |
| Number of Channels | 1 |
| Trim/Adjustable Output | YES |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | THREE TERMINAL VOLTAGE REFERENCE |
| Operating Supply Current | 1mA |
| Voltage - Input | 4.5V~30V |
| Nominal Supply Current | 750μA |
| Max Supply Current | 750μA |
| Quiescent Current | 1mA |
| Max Output Voltage | 10V |
| Voltage - Output (Min/Fixed) | 2.5V 5V 7.5V 10V |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 30V |
| Reference Voltage | 2.5V |
| Reference Type | Series |
| Min Output Voltage | 10V |
| Max Junction Temperature (Tj) | 125°C |
| Noise - 0.1Hz to 10Hz | 50μVp-p |
| Height | 5.72mm |
| Width | 8.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD584TH Description
AD584TH is an eight-terminal precision reference voltage source for FERING pins. Four commonly used output voltages are programmable: 10.000 V, 7.500 V 5.000 V and 2.500 V. Other output voltages above, below, or between the four standard outputs can also be provided by adding external resistors. The input voltage can vary from 4.5V to 30V.
Laser wafer trimming (LWTM) is used to adjust the pin programmable output level and temperature coefficient to achieve the most flexible monolithic form of high-precision voltage reference.
In addition to the programmable output voltage, AD584 provides a unique strobe terminal that allows the device to be turned on or off. When the AD584 is used as a power reference, a single low-end power supply can be used to turn off the power.
Power signal. In the "off" state, the leakage current of AD584 is reduced to about 100mA. In the "on" state, including the output buffer amplifier, the total power supply current is usually 750 Ma. It is recommended that AD584 be used as a reference for 8-10-12-bit DIA converters that require external precision references. The device is also ideal for all TVPE OFA/D converters with a precision of up to 14 bits. Whether successive approximation design or raster design, it usually provides better performance than the standard self-contained voltage reference.
The operating temperature of AD584J, K and L is 0 °C to + 70 °C, and the operating temperature of AD584S and T is-55 °+ 125 °C range. All grades are packed in sealed 8-terminal to-99 metal cans. AD584 and Kare also offer 8-pin plastic impregnation.
AD584TH Features
Four Programmable Output Voltages:
10.000V7.500V.5.0002.500 Laser-Trimmed to High Accuracies No External Components Required Trimmed Temperature Coefficient:
5 ppmC maxCto+70C(AD584L)
15ppmCmax-55Cto+125°C(AD584T Zero Output Strobe Terminal Provided Two Termina Neaative Reference Capability(5 V &Above)
Output Sources or Sinks Current
Low Quiescent Current: 1.0 mA max10mA Current Output Capability
MIL-STD-883 Compliant Versions Available
AD584TH Applications
8-10-12-bit DIA converters
