AD600ARZ-R7
| Parameters | |
|---|---|
| Series | X-AMP® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 105Ohm |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD600 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Number of Circuits | 2 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 14mA |
| Power Dissipation | 600mW |
| Slew Rate | 275V/μs |
| Amplifier Type | Variable Gain |
| Common Mode Rejection Ratio | 30 dB |
| Current - Input Bias | 350nA |
| Voltage - Supply, Single/Dual (±) | ±4.75V~5.25V |
| Output Current per Channel | 50mA |
| Gain Bandwidth Product | 35MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 41.07dB |
| Dual Supply Voltage | 5V |
| Length | 10.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 665.986997mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
AD600ARZ-R7 Overview
In order to protect the op amps, a 16-SOIC (0.295, 7.50mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations approaches 16. A total of 16 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Other Analog ICs op amp ic can be identified by the fact that this is a type of Other Analog ICs device. The op amp ic has an array of 16 pins on it. For this electronic part, it is recommended that you mount it with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Using a supply current of 14mA , this buffer op amp will be able to operate. Keeping the voltage gain at 41.07dB is the best course of action. On this buffer amplifier, there are 2 circuits. The linear amplifier consists of 2 different elements in total. As the name implies, X-AMP? refers to the series of the buffer op amp. Op amp resistance should stay within the range of 105Ohm. The buffer op amp also uses a ANALOG CIRCUIT analog IC.
AD600ARZ-R7 Features
16 Pins
supply voltage of 5V
41.07dB voltage gain
Resistance of 105Ohm
AD600ARZ-R7 Applications
There are a lot of Analog Devices Inc. AD600ARZ-R7 Instrumentational OP Amps applications.
- High input resistance broadband
- Portable electronic products powered by batteries
- Video amplifiers
- Signal amplification
- Power control
- Multimedia playback equipment
- Medical instruments
- Fast A/D and D/A converters
- Power generator
- Laptop
