AD620BN
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Max Power Dissipation | 650mW |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AD620 |
| Pin Count | 8 |
| Operating Supply Voltage | 36V |
| Number of Elements | 1 |
| Operating Supply Current | 1.3mA |
| Nominal Supply Current | 1.3mA |
| Power Dissipation | 650mW |
| Slew Rate | 1.2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 93 dB |
| Current - Input Bias | 500pA |
| Voltage - Supply, Single/Dual (±) | 4.6V~36V ±2.3V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 30mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage - Input Offset | 15μV |
| -3db Bandwidth | 1MHz |
| Input Offset Current-Max (IIO) | 0.00075μA |
| Voltage Gain-Min | 1 |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.004% |
| Height Seated (Max) | 4.57mm |
| Length | 9.27mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD620BN Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. The instrumentation amplifier in this picture is of the Instrumentation-type. Linear amplifier is delivered in a Tube case. A total of 8 terminations have been reported in the past few weeks. In this case, there are 8 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. In total, the buffer amplifier consists of 8 pins. In terms of input offset voltage, operational amplifier rates 30mV. Through Hole is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~85°C. Using an 1.3mA supply current, this operational amplifier ics can be operated. Op amp has total of 1 elements. The operating supply voltage of the buffer op amp is rated at 36V. There are a maximum of 1 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. 10GOhm is the range in which the op amp resistance should lie.
AD620BN Features
8 Pins
supply voltage of 15V
Resistance of 10GOhm
AD620BN Applications
There are a lot of Analog Devices Inc. AD620BN Instrumentational OP Amps applications.
- Weighing systems
- Measurements of Wheatstone bridge
- Fission chambers
- Multimedia playback equipment
- Automation control systems
- Home audio systems
- Portable media players
- Exponential operation circuits
- Television
- Active probe
