AD620BNZ
| Parameters | |
|---|---|
| -3db Bandwidth | 1MHz |
| Dual Supply Voltage | 9V |
| Input Offset Current-Max (IIO) | 0.00075μA |
| Voltage Gain-Min | 1 |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.004% |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Max Power Dissipation | 650mW |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AD620 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 1.3mA |
| Nominal Supply Current | 900μA |
| Power Dissipation | 650mW |
| Slew Rate | 1.2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 93 dB |
| Current - Input Bias | 500pA |
| Voltage - Supply, Single/Dual (±) | 4.6V~36V ±2.3V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 30mV |
| Bandwidth | 120 kHz |
| Gain Bandwidth Product | 120 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Voltage - Input Offset | 15μV |
AD620BNZ Overview
There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. This is a Instrumentation type op amp. In the case of Tube cases, linear amplifier will be delivered. A total of 8 terminations have been reported in the past few weeks. It consists of a total of 8 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 30mV. The mounting type that is recommended for this electrical part is Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Operational amplifier can operate supply current at 1.3mA. 1 channels are available on the instrumentation amplifier. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 1. 10GOhm is the range in which the op amp resistance should lie.
AD620BNZ Features
8 Pins
supply voltage of 15V
Resistance of 10GOhm
AD620BNZ Applications
There are a lot of Analog Devices Inc. AD620BNZ Instrumentational OP Amps applications.
- Subtraction operation circuits
- Division circuits
- Television
- Instrumentation
- Automatic control
- Large motor controllers
- Comparator
- Measurements of Wheatstone bridge
- High input resistance broadband
- Test equipment
