banner_page

AD621SQ/883B

18mA per Channel 500pA 93 dB Instrumentational OP Amps 0.004μA 36V ±2.3V~18V AD622 8 Pins 8-CDIP (0.300, 7.62mm)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-AD621SQ/883B
  • Package: 8-CDIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 295
  • Description: 18mA per Channel 500pA 93 dB Instrumentational OP Amps 0.004μA 36V ±2.3V~18V AD622 8 Pins 8-CDIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating Lead, Tin
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-CDIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature -55°C~125°C
Packaging Tube
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 10GOhm
Max Power Dissipation 650mW
Technology BIPOLAR
Terminal Position DUAL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 15V
Terminal Pitch 2.54mm
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number AD622
Pin Count 8
Qualification Status Not Qualified
Operating Supply Voltage 36V
Number of Elements 3
Number of Circuits 1
Operating Supply Current 1.3mA
Nominal Supply Current 1.3mA
Power Dissipation 650mW
Output Current 18mA
Slew Rate 1.2V/μs
Amplifier Type Instrumentation
Common Mode Rejection Ratio 93 dB
Current - Input Bias 500pA
Voltage - Supply, Single/Dual (±) ±2.3V~18V
Output Current per Channel 18mA
Input Offset Voltage (Vos) 35μV
Bandwidth 800 kHz
Neg Supply Voltage-Nom (Vsup) -15V
Average Bias Current-Max (IIB) 0.004μA
Power Supply Rejection Ratio (PSRR) 95dB
Voltage - Input Offset 75μV
-3db Bandwidth 0.2MHz
Input Offset Current-Max (IIO) 0.002μA
Voltage Gain-Min 10
Input Voltage Noise Density 9nV/sqrt Hz
Voltage Gain-Nom 100
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

AD621SQ/883B Overview


There is a 8-CDIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tube case. We are approaching the 8h termination of the year. In this case, there are 8 pins on the board. This linear amplifier should be powered by an 15V battery. It has 8 pins that make up the linear amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 35μV. This electronic part is best mounted with type Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -55°C~125°C . You can run this op amp ic on 1.3mA . During the manufacturing process, this buffer amplifier is divided into 1 circuits. A total of 3 elements are present in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 36V voltage. The minimum voltage gain this buffer op amp is able to conduct is 10. In order for the op amp resistance to remain within the 10GOhm range, the op amp should be tested.

AD621SQ/883B Features


8 Pins
supply voltage of 15V
Resistance of 10GOhm

AD621SQ/883B Applications


There are a lot of Analog Devices Inc. AD621SQ/883B Instrumentational OP Amps applications.

  • Weak signal detection
  • Radiation thermometry transducers
  • Tablets
  • Image computer boards
  • Blood pressure sensors
  • MP3
  • Differentiator circuits
  • Exponential operation circuits
  • RF cable systems
  • Power generator

Write a review

Note: HTML is not translated!
    Bad           Good