AD622ANZ

1 Channels 18mA per Channel 2nA 86 dB Instrumentational OP Amps 0.005μA 18V ±2.6V~18V AD622 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-AD622ANZ
Package: 8-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 345
Description: 1 Channels 18mA per Channel 2nA 86 dB Instrumentational OP Amps 0.005μA 18V ±2.6V~18V AD622 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	20kOhm
Max Power Dissipation	650mW
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	2.54mm
Base Part Number	AD622
Pin Count	8
Operating Supply Voltage	18V
Number of Channels	1
Operating Supply Current	1.3mA
Nominal Supply Current	900μA
Power Dissipation	650mW
Max Supply Current	1.3mA
Slew Rate	1.2V/μs
Amplifier Type	Instrumentation
Common Mode Rejection Ratio	86 dB
Current - Input Bias	2nA
Voltage - Supply, Single/Dual (±)	±2.6V~18V
Output Current per Channel	18mA
Input Offset Voltage (Vos)	60μV
Bandwidth	1MHz
Gain Bandwidth Product	1MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Average Bias Current-Max (IIB)	0.005μA
Power Supply Rejection Ratio (PSRR)	110dB
Settling Time	10 μs
-3db Bandwidth	1MHz
Input Offset Current-Max (IIO)	0.0025μA
Voltage Gain-Min	1
Input Voltage Noise Density	12nV/sqrt Hz
Voltage Gain-Nom	10
Height	3.43mm
Length	9.27mm
Width	7.24mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

AD622ANZ Overview

A 8-DIP (0.300, 7.62mm) case is used to package the op amp. Op amps are Instrumentation types of amplifier on the chip. In the case of Tube cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 8. It consists of a total of 8 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. 8 pins are located on the operational amplifiers. Op amp rates 60μV as input offset voltage. This electronic component is recommended to be mounted using the mounting type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.3mA and 10 . There are 1 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 18V. To conduct electronic part voltage gain higher than 1. During testing, the instrumentation amplifier resistance should remain within a range of 20kOhm.