AD622ARZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 20kOhm |
| Max Power Dissipation | 650mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD622 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Elements | 1 |
| Operating Supply Current | 1.3mA |
| Nominal Supply Current | 900μA |
| Power Dissipation | 650mW |
| Max Supply Current | 1.5mA |
| Slew Rate | 1.2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | ±2.6V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 125μV |
| Bandwidth | 1MHz |
| Gain Bandwidth Product | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Voltage - Input Offset | 60μV |
| Settling Time | 10 μs |
| -3db Bandwidth | 1MHz |
| Input Offset Current-Max (IIO) | 0.0025μA |
| Voltage Gain-Min | 1 |
| Input Voltage Noise Density | 12nV/sqrt Hz |
| Voltage Gain-Nom | 10 |
| Height | 1.75mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD622ARZ-R7 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. This is a Instrumentation type op amp. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. We are approaching the 8h termination of the year. A total of 8 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 15V. In total, the buffer amplifier consists of 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 125μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Operational amplifier can operate supply current at 1.3mA. It is possible to count 1 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 18V voltage. A minimum voltage gain of 1 is the minimum voltage gain that this instrumentation amplifier is capable of producing. The op amp resistance should stay within the range of 20kOhm.
AD622ARZ-R7 Features
8 Pins
supply voltage of 15V
Resistance of 20kOhm
AD622ARZ-R7 Applications
There are a lot of Analog Devices Inc. AD622ARZ-R7 Instrumentational OP Amps applications.
- Large motor controllers
- Semiconductor detectors
- Strain gauges
- Power transmission
- Power generator
- Mobile phone
- Portable electronic products powered by batteries
- Multimedia playback equipment
- Test equipment
- Exponential operation circuits
