AD623ARMZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 2GOhm |
| Max Power Dissipation | 650mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD623 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 9V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 550μA |
| Nominal Supply Current | 375μA |
| Power Dissipation | 650mW |
| Slew Rate | 0.3V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 17nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ± 2.5V~6V |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 800 kHz |
| Gain Bandwidth Product | 800 kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 0.0275μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 200μV |
| -3db Bandwidth | 0.8MHz |
| Dual Supply Voltage | 5V |
| Input Offset Current-Max (IIO) | 0.0025μA |
| Voltage Gain-Min | 1 |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD623ARMZ Description
AD623ARMZ is an integrated, single-or dual-supply instrumentation amplifier. This device supports single gain set resistor programming and confirms to the 8-lead industry standard pinout configuration, thus designers can fully make use of its flexibility. AD623ARMZ is configured for unity gain with no external resistor, otherwise, it can be programmed for gain of up to 1000. As a result of increasing ac common-mode rejection ratio coincident with increasing gain, it is able to keep high performance in accuracy. Line noise harmonics are rejected because the common-mode rejection ratio maintains constant at the case of up to 200 Hz. Wide supply voltage, low power consumption, and full power supply amplitude output make it be well suited for battery powered applications.
AD623ARMZ Features
Wide supply voltage
Low power consumption
Rail-to-rail output swing
Superior dynamic specifications
Full power supply amplitude output
AD623ARMZ Applications
Low power medical instrumentation
Transducer interfaces
Thermocouple amplifiers
Industrial process controls
Difference amplifiers
Low power data acquisition
AD623ARMZ is an integrated, single-or dual-supply instrumentation amplifier. This device supports single gain set resistor programming and confirms to the 8-lead industry standard pinout configuration, thus designers can fully make use of its flexibility. AD623ARMZ is configured for unity gain with no external resistor, otherwise, it can be programmed for gain of up to 1000. As a result of increasing ac common-mode rejection ratio coincident with increasing gain, it is able to keep high performance in accuracy. Line noise harmonics are rejected because the common-mode rejection ratio maintains constant at the case of up to 200 Hz. Wide supply voltage, low power consumption, and full power supply amplitude output make it be well suited for battery powered applications.
AD623ARMZ Features
Wide supply voltage
Low power consumption
Rail-to-rail output swing
Superior dynamic specifications
Full power supply amplitude output
AD623ARMZ Applications
Low power medical instrumentation
Transducer interfaces
Thermocouple amplifiers
Industrial process controls
Difference amplifiers
Low power data acquisition
