AD623ARMZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 2GOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 650mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD623 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Operating Supply Current | 550μA |
| Power Dissipation | 650mW |
| Supply Current-Max | 0.625mA |
| Slew Rate | 0.3V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 17nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ± 2.5V~6V |
| Input Offset Voltage (Vos) | 25μV |
| Gain Bandwidth Product | 800 kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 0.0275μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 200μV |
| -3db Bandwidth | 0.8MHz |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Input Offset Current-Max (IIO) | 0.0025μA |
| Voltage Gain-Min | 1 |
| Input Voltage Noise Density | 35nV/sqrt Hz |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD623ARMZ-REEL Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the Instrumentation-type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. It consists of a total of 8 pins in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. Linear amplifier includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 25μV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, this op amp functions well at -40°C~85°C. A supply current of 550μA can be used to operate this linear amplifier. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. There are a total of 1 elements in this linear amplifier. In this op amp ic, the minimum voltage gain is 1. It is important to keep the resistance within the 2GOhm range of the op amps.
AD623ARMZ-REEL Features
8 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
Resistance of 2GOhm
AD623ARMZ-REEL Applications
There are a lot of Analog Devices Inc. AD623ARMZ-REEL Instrumentational OP Amps applications.
- Power control
- Fission chambers
- Home audio systems
- Automotive sensors
- Commercial audio systems
- Signal filtering
- Polarized electrodes
- Wireless base stations
- High input resistance broadband
- Multiplication circuits
