AD623ARZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 2GOhm |
| Max Power Dissipation | 650mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD623 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Operating Supply Current | 550μA |
| Nominal Supply Current | 550μA |
| Power Dissipation | 650mW |
| Slew Rate | 0.3V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 17nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ± 2.5V~6V |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 800 kHz |
| Gain Bandwidth Product | 800 kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 0.0275μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| -3db Bandwidth | 0.8MHz |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Input Offset Current-Max (IIO) | 0.0025μA |
| Voltage Gain-Min | 1 |
| Input Voltage Noise Density | 35nV/sqrt Hz |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD623ARZ-RL Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. A Instrumentation-type buffer amplifier is shown here. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. The pins on this board total to 8 in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A total of 8 pins are present on the instrumentation amplifier. Op amp ic rates 25μV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 550μA supply current, this operational amplifier ics can be operated. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. There are a maximum of 1 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. It is recommended to keep the instrumentation amplifier resistance within the range of 2GOhm.
AD623ARZ-RL Features
8 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
Resistance of 2GOhm
AD623ARZ-RL Applications
There are a lot of Analog Devices Inc. AD623ARZ-RL Instrumentational OP Amps applications.
- Radiation thermometry transducers
- Home audio systems
- Comparator
- Television broadcasting equipment
- Industrial applications including automation
- Video amplifiers
- Ultrasound transducers
- Signal filtering
- Automotive sensors
- Tablets
