AD623BRZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 2GOhm |
| Max Power Dissipation | 650mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD623 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 9V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 550μA |
| Nominal Supply Current | 375μA |
| Power Dissipation | 650mW |
| Slew Rate | 0.3V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 17nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ± 2.5V~6V |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 800 kHz |
| Gain Bandwidth Product | 800 kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 0.0275μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| -3db Bandwidth | 0.8MHz |
| Dual Supply Voltage | 5V |
| Input Offset Current-Max (IIO) | 0.002μA |
| Voltage Gain-Min | 1 |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD623BRZ Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Instrumentation-type instrumentation amplifiers are used in this application. A Tube case is used for delivering the op amp. We are approaching the 8h termination of the year. A total of 8 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 25μV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, op amp ranges -40°C~85°C. Using a supply current of 550μA , this buffer op amp will be able to operate. There are a total of 1 channels available on the op amps. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 9V voltage. This operational amplifier can conduct a voltage gain of up to 1 at a minimum. It is recommended to keep the buffer amps resistance within the range of 2GOhm.
AD623BRZ Features
8 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
Resistance of 2GOhm
AD623BRZ Applications
There are a lot of Analog Devices Inc. AD623BRZ Instrumentational OP Amps applications.
- Multimedia playback equipment
- Automatic control
- Signal amplification
- Tablets
- Portable docking station
- Mobile phone
- Exponential operation circuits
- Differentiator circuits
- Inverse/same-phase proportional circuit
- Gaming industry
