AD627ARZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 20GOhm |
| Max Power Dissipation | 800mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD627 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 7.5V |
| Number of Elements | 1 |
| Operating Supply Current | 85μA |
| Nominal Supply Current | 85μA |
| Power Dissipation | 800mW |
| Max Supply Current | 85μA |
| Slew Rate | 0.06V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 77 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 2.2V~36V ±1.1V~18V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 80 kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 60dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| -3db Bandwidth | 0.08MHz |
| Voltage Gain-Nom | 10 |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD627ARZ-R7 Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. This is a Instrumentation type op amp. A Tape & Reel (TR) case is used for delivering the op amp. There is a growing number of terminations approaching the number of 8. There are a total of 8 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. An 8-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 50μV. For this electrical component, Surface Mount is the recommended mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureUsing an 85μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 60dB for the time being. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. Op amp has total of 1 elements. The operating supply voltage of instrumentation amplifier is rated 7.5V voltage. It is important to keep the resistance within the 20GOhm range of the linear amplifier.
AD627ARZ-R7 Features
8 Pins
supply voltage of 5V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 20GOhm
AD627ARZ-R7 Applications
There are a lot of Analog Devices Inc. AD627ARZ-R7 Instrumentational OP Amps applications.
- Large motor controllers
- Automatic control
- RF cable systems
- Automation control systems
- Television broadcasting equipment
- Fast A/D and D/A converters
- Multimedia playback equipment
- Measurements of Wheatstone bridge
- High speed sample
- Inverse/same-phase proportional circuit
