AD640JNZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 500kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog Computational Functions |
| Max Power Dissipation | 200mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | AD640 |
| Pin Count | 20 |
| Number of Circuits | 1 |
| Analog IC - Other Type | LOG OR ANTILOG AMPLIFIER |
| Operating Supply Current | 44mA |
| Nominal Supply Current | 44mA |
| Power Dissipation | 200mW |
| Quiescent Current | 15mA |
| Response Time | 10 ns |
| Amplifier Type | Logarithmic |
| Current - Input Bias | 7μA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~7.5V |
| Output Current per Channel | 2.3mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 145MHz |
| Supply Current-Max (Isup) | 60mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage - Input Offset | 50μV |
| -3db Bandwidth | 350MHz |
| Dual Supply Voltage | 5V |
| Number of Amplifiers | 5 |
| Positive Input Voltage-Max | 0.3V |
| Negative Input Voltage-Max | -2V |
| Height | 3.3mm |
| Length | 26.16mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD640JNZ Overview
In the package, you will find a 20-DIP (0.300, 7.62mm)-case to contain the op amp ic. Op amps are Logarithmic types of amplifier on the chip. A Tube case is used for delivering the op amp. A total of 20 pins are attached to buffer op amp. This linear amplifier should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Analog Computational Functions-type of devices. An 20-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 500μV. The mounting type that is recommended for this electrical part is Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. The buffer amplifier is capable of operating from a supply current of 44mA . During the manufacturing process, this buffer amplifier is divided into 1 circuits. There is an 15mA quiescent current running through op amp ic. 500kOhm should be the range of resistance for the instrumentation amplifier. The other types of analog IC are as follwed LOG OR ANTILOG AMPLIFIER. A total of 5 instrumentation amplifiers are present on the device.
AD640JNZ Features
20 Pins
supply voltage of 5V
Resistance of 500kOhm
AD640JNZ Applications
There are a lot of Analog Devices Inc. AD640JNZ Instrumentational OP Amps applications.
- Automation control systems
- Ultrasound transducers
- Image computer boards
- Cinema or auditorium audio system
- Blood pressure sensors
- Measurements of Wheatstone bridge
- Gaming industry
- Video amplifiers
- single/dual op amp sum and difference circuits
- Information processing
