AD640TE/883B
| Parameters | |
|---|---|
| Amplifier Type | Logarithmic |
| Current - Input Bias | 7μA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~7.5V |
| Input Offset Voltage (Vos) | 5V |
| Bandwidth | 145MHz |
| Supply Current-Max (Isup) | 60mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage - Input Offset | 50μV |
| Current - Output / Channel | 2.3mA |
| -3db Bandwidth | 350MHz |
| Screening Level | MIL-STD-883 Class B |
| Dual Supply Voltage | 5V |
| Positive Input Voltage-Max | 0.3V |
| Negative Input Voltage-Max | -2V |
| Length | 8.89mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-CLCC |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 500kOhm |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Analog Computational Functions |
| Max Power Dissipation | 200mW |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD641 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Number of Elements | 5 |
| Number of Circuits | 1 |
| Analog IC - Other Type | LOG OR ANTILOG AMPLIFIER |
| Operating Supply Current | 44mA |
| Nominal Supply Current | 44mA |
| Power Dissipation | 200mW |
| Response Time | 10 ns |
AD640TE/883B Overview
Packaging for the buffer amplifier is in the form of a 20-CLCC case. A Logarithmic-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations is approaching the 20 mark. There are a total of 20 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriAnalog Computational Functionsed as a Analog Computational Functions-type device. The buffer op amp includes 20 pins. As far as the input offset voltage is concerned, linear amplifier rates at 5V. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -55°C~125°C . Using a supply current of 44mA , this buffer op amp will be able to operate. This op amp contains 1 circuits. This linear amplifier has a total of 5 elements. 500kOhm should be the range of resistance for the linear amplifier. This linear amplifier also utiliLOG OR ANTILOG AMPLIFIERes an analog IC known as a LOG OR ANTILOG AMPLIFIER.
AD640TE/883B Features
20 Pins
supply voltage of 5V
Resistance of 500kOhm
AD640TE/883B Applications
There are a lot of Analog Devices Inc. AD640TE/883B Instrumentational OP Amps applications.
- Test equipment
- Addition operation circuits
- Automatic control
- Home audio systems
- Laptop
- Differentiator circuits
- Fission chambers
- Car stereo
- High gain DC amplifier
- Exponential operation circuits
