AD648JNZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | AD648 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Channels | 2 |
| Operating Supply Current | 340μA |
| Nominal Supply Current | 400μA |
| Power Dissipation | 500mW |
| Output Current | 2.4mA |
| Quiescent Current | 170μA |
| Slew Rate | 1.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 750μV |
| Low-Bias | YES |
| Micropower | YES |
| Dual Supply Voltage | 15V |
| Input Capacitance | 3pF |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD648JNZ Overview
Op amp is packaged in 8-DIP (0.300, 7.62mm) case. This is a J-FET type op amp. Upon delivery, op amp ic is packaged in a Tube case. There have been a total of 8 terminations over the past year. A total of 8 pins are attached to buffer op amp. Please take in mind that op amp should be run at 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are available on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 1mV. This electronic part is best mounted with type Through Hole. With regard to operating temperature, this op amp functions well at 0°C~70°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 340μA and 10 . You should keep the voltage gain at 120dB for the time being. Buffer op amp is equipped with 2 channels on the device. The operating supply voltage of the buffer op amp is rated at 15V. Linear amplifier has a quiescent current of 170μA.
AD648JNZ Features
8 Pins
supply voltage of 15V
120dB voltage gain
AD648JNZ Applications
There are a lot of Analog Devices Inc. AD648JNZ Instrumentational OP Amps applications.
- Hand-held batteries
- Ultrasound transducers
- Radiation thermometry transducers
- pH (acidity)
- Test equipment
- Industrial control system
- Fast A/D and D/A converters
- Signal amplification
- Signal operation
- Measurements of Wheatstone bridge
