AD652SE/883B
| Parameters | |
|---|---|
| Operating Supply Current | 15mA |
| Nominal Supply Current | 15mA |
| Accuracy | 2 % |
| Frequency (Max) | 2MHz |
| Max Input Voltage | 10V |
| Reference Voltage | 5V |
| Max Dual Supply Voltage | 18V |
| Linearity | ±0.02% |
| Min Dual Supply Voltage | 6V |
| Screening Level | MIL-STD-883 Class B |
| Dual Supply Voltage | 15V |
| Negative Supply Voltage-Nom | -15V |
| Positive Input Voltage-Max | 5V |
| Full Scale | ±25ppm/°C |
| Total Error-Max | 0.5% |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-CLCC |
| Number of Pins | 20 |
| Packaging | Tube |
| Series | Military, MIL-STD-883 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Voltage to Frequency |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Analog Special Function Converters |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Frequency | 5MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD652 |
| Pin Count | 20 |
| JESD-30 Code | S-CQCC-N16 |
| Qualification Status | Not Qualified |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 12V |
AD652SE/883B Overview
The package 20-CLCC includes it. The electronic component is mounted in the direction of Surface Mount. There is a package in the way of Tube. The type of this electrical device is Voltage to Frequency. It is possible to terminate a transmission line with a 16 termination, which is an end device that matches the line's characteristic impedance. There is a 20 pin count on this device. A supply voltage of 15V supplies power to the device. There are several parts that can be founded that are related to the base part number. On computers and other communication devices, there are pins called 20 pins, which are pronged contacts. To ensure its reliability, it must operate at a minimum operating temperature of -55°C. To ensure the reliability of the device, the maximum operating temperature is 125°C. It has been mounted in the way of Surface Mount. There is a part included in Analog Special Function Converters. If the supply voltage (Vsup) is greater than 12V, then it should be used. The maximum supply voltage (Vsup) reaches 36V. It operates at a frequency of 5MHz. The frequency of this device is maximally 2MHz. 15mA requires a supply current to perform its functions properly. There is a maximum input type of 10V for this electronic part. A dual supply voltage of 15V is used to power the device. A reference voltage of 5V is applied to this electrical device.
AD652SE/883B Features
20-CLCC package
16 terminations
20 pin count
20 pins
A dual supply voltage of 15V
AD652SE/883B Applications
There are a lot of Analog Devices Inc. AD652SE/883B V/F & F/V Converters applications.
- lsolation of High Common-Mode Voltages
- Clutch Control
- 13-bit Analog-to-Digital Converters (ADC)
- Over-and Under-Speed Sensing
- Horn Control
- Battery Monitoring
- Frequency Meters/Tachometer
- Breaker Point Dwell Meters
- Motor Control
- Remote-Sensor Monitoring
