AD677KN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 630mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD677 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Polarity | Bipolar |
| Configuration | S/H-ADC |
| Interface | SPI, Serial |
| Power Dissipation | 630mW |
| Number of Bits | 16 |
| Input Type | Single Ended |
| Min Input Voltage | 5V |
| Architecture | SAR |
| Max Input Voltage | 10V |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Reference Type | External |
| Data Interface | SPI |
| Resolution | 2 B |
| Sampling Rate | 100 ksps |
| Voltage - Supply, Analog | ±12V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 100k |
| Max Dual Supply Voltage | 12.6V |
| Output Bit Code | BINARY |
| Power Consumption | 450mW |
| Linearity Error-Max (EL) | 0.0023% |
| Integral Nonlinearity (INL) | 2 LSB |
| Min Dual Supply Voltage | 11.4V |
| Sample and Hold / Track and Hold | SAMPLE |
| Dual Supply Voltage | 12V |
| Input Capacitance | 50pF |
| Ratio - S/H:ADC | 1:1 |
| Negative Supply Voltage-Nom | -12V |
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD677KN Overview
The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 16-DIP (0.300, 7.62mm) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 16 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 12V.The A/D converter has 1 channels.The is equipped with 16 pin count.The peak reflow temperature (Cel) amounts to NOT APPLICABLE to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Through Hole.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 100k Hz.The input type of this electronic AD converter is Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.The supply/analog voltage of this electrical ADC converter is ±12V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD677 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.ADC converters can be mounted using Through Hole.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 630mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 630mW.The ADC converter consists of 1 elements.The maximal input type of this electronic AD converter is 10V.The digital converter supports the minimal input voltage of 5V.The dual supply type of this electronic AD converter is 12V.It operates with the maximal dual supply voltage of 12.6V.It operates with the minimal dual supply voltage of 11.4V.
AD677KN Features
1 Functions
16 basic kinds of terminations
16 pin count
1 elements
AD677KN Applications
There are a lot of Analog Devices Inc. AD677KN ADC applications.
- Rotary encoder
- Communication test equipment
- Medical Instrumentation and medical imaging
- Music reproduction technology
- Telecommunications
- Communications
- Automotive
- In-building wireless telephony
- Wireless local loop
- Data Acquisition Systems
