AD704AR-16
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD704 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Operating Supply Current | 2.4mA |
| Quiescent Current | 600μA |
| Supply Current-Max | 2.6mA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 132 dB |
| Current - Input Bias | 100pA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 800 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 800 kHz |
| Voltage Gain | 126.02dB |
| Power Supply Rejection Ratio (PSRR) | 132dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 50μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00027μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Voltage Noise Density | 17nV/sqrt Hz |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD704AR-16 Overview
It is packaged in an 16-SOIC (0.295, 7.50mm Width)-case that protects the operational amplifiers from damage. Buffer amps of this type are called General Purpose-types. A Tube case is used for delivering the op amp. The number of terminations approaches 16. In total, there are 16 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 15V volts. It should be noted that this op amp is a type of Operational Amplifier device. An 16-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 150μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureUsing a supply current of 2.4mA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 126.02dB at all times. There are a total of 4 channels available on the op amps. The quiescent current is 600μA.
AD704AR-16 Features
16 Pins
supply voltage of 15V
126.02dB voltage gain
AD704AR-16 Applications
There are a lot of Analog Devices Inc. AD704AR-16 Instrumentational OP Amps applications.
- Car stereo
- Subtraction operation circuits
- pH (acidity)
- Switching amplifier
- Integrator circuits
- Displayers for aircraft and air transportation control systems
- Biopotential
- Radar
- Radiation thermometry transducers
- Gaming industry
