AD704ARZ-16-REEL
| Parameters | |
|---|---|
| Quiescent Current | 600μA |
| Supply Current-Max | 2.6mA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 132 dB |
| Current - Input Bias | 100pA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 150μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 800 kHz |
| Voltage Gain | 126.02dB |
| Power Supply Rejection Ratio (PSRR) | 132dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 50μV |
| Low-Bias | YES |
| Micropower | YES |
| -3db Bandwidth | 800kHz |
| Bias Current-Max (IIB) @25C | 0.00027μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Voltage Noise Density | 17nV/sqrt Hz |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD704 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Operating Supply Current | 2.4mA |
AD704ARZ-16-REEL Overview
Op amp is packaged in 16-SOIC (0.295, 7.50mm Width) case. An op amp of this type is a General Purpose-type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There have been a total of 16 terminations over the past year. The pins on this board total to 16 in total. Please take in mind that this instrumentation amplifier should be run at 15V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 16 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 150μV voltage. This electronic part is best mounted with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using a supply current of 2.4mA , this buffer op amp will be able to operate. Voltage gain should remain at 126.02dB. Buffer op amp is equipped with 4 channels on the device. TAPE AND REEL is adopted to pack the instrumentation amplifier. The quiescent current is 600μA.
AD704ARZ-16-REEL Features
16 Pins
supply voltage of 15V
126.02dB voltage gain
AD704ARZ-16-REEL Applications
There are a lot of Analog Devices Inc. AD704ARZ-16-REEL Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Information processing
- Gaming industry
- Non-polarized electrodes
- Portable media players
- Fast A/D and D/A converters
- Weighing systems
- Micro signal measurement
- Vehicle electronics
- Digital cameras
