AD704JNZ
| Parameters | |
|---|---|
| Common Mode Rejection Ratio | 132 dB |
| Current - Input Bias | 100pA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 800 kHz |
| Gain Bandwidth Product | 800 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 800 kHz |
| Voltage Gain | 126.02dB |
| Power Supply Rejection Ratio (PSRR) | 132dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 50μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00027μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Voltage Noise Density | 17nV/sqrt Hz |
| Height | 3.3mm |
| Length | 19.05mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | AD704 |
| Pin Count | 14 |
| Number of Channels | 4 |
| Operating Supply Current | 2.4mA |
| Quiescent Current | 600μA |
| Supply Current-Max | 2.6mA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
AD704JNZ Overview
In the package, you will find a 14-DIP (0.300, 7.62mm)-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. There is a Tube case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 14. The pins on this board total to 14 in total. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. In total, the buffer amplifier consists of 14 pins. In terms of the input offset voltage, instrumentation amplifier rates at 150μV. This electronic part is best mounted with type Through Hole. With regard to operating temperature, op amp ranges 0°C~70°C. This op amp can operate from a supply current at 2.4mA. You should keep the voltage gain at 126.02dB for the time being. 4 channels are available on the instrumentation amplifier. There is an 600μA quiescent current running through op amp ic.
AD704JNZ Features
14 Pins
supply voltage of 15V
126.02dB voltage gain
AD704JNZ Applications
There are a lot of Analog Devices Inc. AD704JNZ Instrumentational OP Amps applications.
- Radiation thermometry transducers
- Portable docking station
- Precision measurement
- Medical instruments
- Micro signal measurement
- Voltage regulation circuit
- Radar
- Mobile phone
- Weak signal detection
- Automotive sensors
