AD704JRZ-16
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD704 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Operating Supply Current | 2.4mA |
| Nominal Supply Current | 2.4mA |
| Quiescent Current | 600μA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 132 dB |
| Current - Input Bias | 100pA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 800 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 800 kHz |
| Voltage Gain | 126.02dB |
| Power Supply Rejection Ratio (PSRR) | 132dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 50μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00027μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Voltage Noise Density | 17nV/sqrt Hz |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD704JRZ-16 Overview
Op amp is packaged in 16-SOIC (0.295, 7.50mm Width) case. Buffer amps of this type are called General Purpose-types. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 16. Linear amplifier has a total of 16 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. Instrumentation amplifier is a part of Operational Amplifier. The op amp ic has an array of 16 pins on it. Op amp ic rates 150μV for input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 2.4mA, this op amp ic can operate. The voltage gain should stay at 126.02dB. 4 channels are available on the instrumentation amplifier. Buffer amplifier has a quiescent current of 600μA.
AD704JRZ-16 Features
16 Pins
supply voltage of 15V
126.02dB voltage gain
AD704JRZ-16 Applications
There are a lot of Analog Devices Inc. AD704JRZ-16 Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Integrator circuits
- Signal filtering
- Signal amplification
- Blood pressure sensors
- Portable docking station
- Comparator
- Ultrasound transducers
- Subtraction operation circuits
- Portable electronic products powered by batteries
