AD704JRZ-16-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD704 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Operating Supply Current | 2.4mA |
| Nominal Supply Current | 2.4mA |
| Quiescent Current | 600μA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 132 dB |
| Current - Input Bias | 100pA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 150μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 800 kHz |
| Voltage Gain | 126.02dB |
| Power Supply Rejection Ratio (PSRR) | 132dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 50μV |
| Low-Bias | YES |
| Micropower | YES |
| -3db Bandwidth | 800kHz |
| Bias Current-Max (IIB) @25C | 0.00027μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Voltage Noise Density | 17nV/sqrt Hz |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD704JRZ-16-REEL Overview
It is packaged in an 16-SOIC (0.295, 7.50mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. The op amp is delivered to you in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 16. A total of 16 pins are located on this board. This linear amplifier should be powered by an 15V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The buffer op amp includes 16 pins. There is an input offset voltage of 150μV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureOperational amplifier can operate supply current at 2.4mA. Keeping the voltage gain at 126.02dB is the best course of action. Instrumentation amplifier has 4 channels on it. As a result of this, the buffer amplifier is packed in TAPE AND REEL. The quiescent current is 600μA.
AD704JRZ-16-REEL Features
16 Pins
supply voltage of 15V
126.02dB voltage gain
AD704JRZ-16-REEL Applications
There are a lot of Analog Devices Inc. AD704JRZ-16-REEL Instrumentational OP Amps applications.
- Exponential operation circuits
- Video amplifiers
- Test equipment
- Industrial control system
- Integrator circuits
- Digital cameras
- Subtraction operation circuits
- Measurements of Wheatstone bridge
- Radar
- Power transmission
